Horizontal waste paper baler's working stability depends on the point

The stability of horizontal waste paper baler depends on the reasonable design of the equipment and the high quality of installation. High-quality installation is very important for the horizontal waste paper baler.
The installation of good will reduce the occurrence of failure. Installation should pay attention to what matters?
1, the installation of attention to familiarity with the hydraulic system with the schematic diagram, electrical diagrams, etc..
2, hydraulic components due to the transport of easy to invade the sand, if installed directly will affect the use of equipment, so for the more important components in the installation of the first test its performance, and then install and debug.
3, because the hydraulic components belong to precision machinery, so the installation should be carried out in a clean environment before.
As long as the horizontal waste paper baler is installed in strict accordance with the schematic diagram, in order to reduce the incidence of failure and ensure the reliability of the work of the equipment hydraulic components.
In the disassembly and installation of horizontal waste paper baler should pay attention to the repair of the blade. Blade damage is mainly in the form of blade top and stator inner surface contact and end face and oil plate plane relative to the wear and tear strains, strains are not serious when a little polishing and then.
1, in the disassembly and installation of waste paper baler vane pump, should always pay attention to keep clean, eliminate dirt, dust fall into the pump.
2, disassembly and cleaning process, disable cotton yarn, rags scrubbing parts, so as not to fall off the cotton yarn head mixed into the hydraulic system. Should use brushes and silk cloth.
3, do not allow the use of gasoline to clean, soak the rubber seal.
4, horizontal waste paper baler vane pump for precision machine parts, disassembly process, all parts should be kept light, do not hit the impact. Baler work, should correctly select the size of the bearing specifications and reasonable arrangement of its location, so that the cylinder body by the radial force line of action, in any case, must fall within the length of the bearing roller.